IMI 3040 - Machining Principles
Clock Hours: 100
Delivery Mode
on-ground
Prerequisites: IMI 3030
Course Description:
Machining individual parts to replace broken ones on production equipment is typical in most industrial settings. The industrial maintenance technician must have an understanding of how to make parts that are not readily available quickly and efficiently. The students are instructed in the proper operation and maintenance of an engine lathe, drill press, and vertical milling machine. They then machine two separate parts following a dimensioned and tolerance blueprint. One part is to be turned and threaded on the lathe; the other part is to be made with the mill and the drill press.
The students are instructed by textbook, instructor led demonstration and videotape.
Student Learning Outcomes:
Competencies:
- Describe the operation of a lathe
- Demonstrate the proper setup of the lathe to machine a turning.
- Describe and demonstrate speed and feed when cutting.
- Demonstrate the proper tool selection based on stock material and type of cut.
- Describe the operation of a milling machine.
- Demonstrate the proper setup of the mill to machine a surface.
- Demonstrate the single datum method of layout to locate the center of holes.
- Demonstrate the ability to use a drill/tap chart to select the proper size hole.
- Demonstrate the ability to manually thread shafts and tap holes to a print.
|
