|
May 02, 2024
|
|
|
|
CRT 2010 - Advanced Non-Structure Analyse & Damage Repair
Clock Hours: 125
Delivery Mode on-ground
Prerequisites: CRT 1010 - Safety
CRT 1030 - Non-Struct Analys & DmgeRepair
Industry Certifications I-CAR Platinum Non-Structural Pro Level 1, ASE B3 Non-Structural Analysis and Damage Repair
Course Description: This course will provide instruction in the advanced stages of Non-Structural Repair, including metal finishing, body filling and, also moveable glass and hardware required to be proficient upon entering the workforce.
Student Learning Outcomes: Students will be able to demonstrate knowledge of:
ADVANCED NON-STRUCTURAL REPAIR
- Metal Finishing and Body Filling
- Prepare a panel for body filler by abrading or removing the coatings; featheredge and refine scratches before the application of body filler. HP-I
- Locate and repair surface irregularities on a damaged body panel using power tools, hand tools, and weld-on pulling attachments. HP-I
- Demonstrate hammer and dolly techniques. HP-I
- Heat shrink stretched panel areas to proper contour. HP-G
- Cold shrink stretched panel areas to proper contour. HP-I
- Identify body filler defects; correct the cause and condition. (Pinholing, ghosting, staining, over catalyzing, etc.) HP-I
- Identify different types of body fillers. HP-G
- Shape body filler to contour; finish sand. HP-I
- Perform proper metal finishing techniques for aluminum. HP-G
- Perform proper application of body filler to aluminum. HP-G
- Straighten contours of damaged panels to a suitable condition for body fillings or metal finishing using power tools, hand tools, and weld-on pulling attachments. HP-I
- Moveable Glass and Hardware
- Inspect, adjust, repair or replace window regulators, run channels, glass, power mechanisms, and related controls. HP-I
- Inspect, adjust, repair, remove, reinstall or replace weather-stripping. HP-G
- Inspect, repair or replace, and adjust removable power operated roof panel and hinges, latches,guides, handles, retainer, and controls of sunroofs. HP-G
- Inspect, remove, reinstall, and align convertible top and related mechanisms. HP-G
- Initialize electrical components as needed. HP-G
|
|